RCD400 Series – MCCB Tester

GDP-30

Features

  • LCD Touch screen 7″
  • Linear technology
  • Programming and feed back
  • Optoisolate
  • Transient response Better than 20μs for 1% of the I set with cool-down from vacuum at full load
  • Built-in arbitrary generator
  • Particularly suitable for mounting in test benches, and the the touchscreen makes the use ideal and simple for quality and R&D labs.
  • It is appreciated the very high speed of ascent of the current, up to a frequency band of 20 khz
  • Models available from 10A and 30A TRMS
  • RCD Type:
    • Type A
    • Type B , B+
    • Type C
    •  Type D
    • Type F
  • In According to following Standards:
    • IEC / EN 60898-1
    • IEC / EN 60947-2
    • IEC / EN 61009-1
    • IEC / EN 61008-1
    • IEC / EN 62423
    • Compliance to Other Standard

  • RCD400 series current generators were designed to test RCBs.
    Waveforms like AC, DC, half waves (0° and 180°) and phase angle signals (90°/-90°°) or 135°/ -135°) can be generated, with or without a dc overlay.
    The signal forms can be continuously or with ramp.
    Result can be the tripping time or the tripping level.

  • Different versions are available starting from 10A RMS up to 60A RMS or special versions.

  • All version are able to run all signals / waveforms in according to standards up to 20KHz.
    With Internal Arbitrary generator, is possible create special waveforms.

  • Frequency Band up to 20KHz.

  • Remote control by PC , with  Optional software.

  • Load test, up to 120A

  • Powered RCD up to 16A, 500V

CHARACTERISTICS

  • Regulation 0 – max current depend of model
  • Computer controlled by serial port RS-485 (adapted to RS-232), LAN.
  • Rack mounting 19″ (482 mm)
  • Optional: Software for PC; VPN control; calibration kit; Module for Load test up to 120A; Module for Powered test up to 16A , 500Vac.
GDP-30
GDP-30 retro

Features

  • LCD Touch screen 7″
  • Linear technology
  • Programming and feed back
  • Optoisolate
  • Transient response Better than 20μs for 1% of the I set with cool-down from vacuum at full load
  • Built-in arbitrary generator
  • Particularly suitable for mounting in test benches, and the the touchscreen makes the use ideal and simple for quality and R&D labs.
  • It is appreciated the very high speed of ascent of the current, up to a frequency band of 20 khz
  • Models available from 10A and 60A RMS
  • RCD Type:
    • Type A
    • Type B; B+
    • Type C
    •  Type D
    • Type F
  • In According to following Standards:
    • IEC / EN 60898-1
    • IEC / EN 60947-2
    • IEC / EN 61009-1
    • IEC / EN 61008-1
    • IEC / EN 62423
    • Compliance to Other Standard

  • RCd400 series current generators were designed to test RCBs.
    Wave forms like AC, DC, half waves (0° and 180°) and phase angle signals (90°/270°) or 135°/ 315°) can be generated, with or without a dc overlay.
    The signal forms can be continuously or with ramp.
    Result can be the tripping time or the tripping level.

  • Different versions are available starting from 10A RMS up to 60 A RMS or special versions.

  • All version are able to run all signals / waveforms in according to standards up to 20KHz.
    With Internal Arbitrary generator, is possible create special waveforms.

  • Frequency Band up to 20KHz.

  • Remote control by PC  Optional software.

  • Option Load test up to 120A

  • Option powered RCD

Contact Us